EN
Webmail

Email Campaign Statistics: Sent, Opened, Clicked, Unsubscribed

Email Campaign Statistics: Sent, Opened, Clicked, Unsubscribed

After an email goes out, the work is only half done. The other half is reading what happened. Email campaign statistics tell you how many messages were sent, how many were opened, how many recipients clicked, and how many unsubscribed, and those four numbers are enough to improve almost every future campaign when they are read correctly. Our email marketing service reports exactly these figures for every campaign, so this guide explains what each one means, how to turn them into useful ratios, where they mislead, and how to decide what to change next.

We keep the focus practical. You do not need a data team to learn from a newsletter. You need to know which number answers which question, to compare like with like, and to change one thing at a time.

The four numbers and the question each one answers

Every campaign in our service has its own statistics page. The figures are simple, and that is their strength: each one points at a different part of the campaign.

NumberWhat it countsThe question it answers
SentMessages that went out to the chosen recipientsHow large was this campaign?
OpenedRecipients who opened the messageDid the subject line and sender name earn attention?
ClickedRecipients who clicked a link in the messageDid the content and the button make people act?
UnsubscribedRecipients who asked to stop receiving your emailsWas this message, or its frequency, right for this audience?

Read them in that order, from the front of the funnel to the back. A weak open number points at the subject line, the sender name or the timing. A good open number with weak clicks points at the content, the offer or the layout. A spike in unsubscribes points at relevance or frequency.

Turning counts into ratios

Raw counts are hard to compare between campaigns of different size, so convert them into percentages. Four simple ratios cover most needs, and you can calculate them by hand from the figures in the statistics.

  • Open rate = opened divided by sent. It shows how many recipients responded to the first impression.
  • Click rate = clicked divided by sent. It shows how many recipients acted at all.
  • Click-to-open rate = clicked divided by opened. It shows how convincing the content was for people who did open it, and it removes the effect of the subject line.
  • Unsubscribe rate = unsubscribed divided by sent. It shows how well the message fit its audience.

For example, suppose 2,000 messages were sent, 640 were opened, 96 recipients clicked and 4 unsubscribed. The open rate is 32 percent, the click rate 4.8 percent, the click-to-open rate 15 percent and the unsubscribe rate 0.2 percent. By themselves these numbers mean little. They gain meaning when you compare them with your own previous campaigns to the same list.

Why you should compare with yourself, not with the internet

Published industry averages are tempting, but they mix very different lists, industries and definitions. A newsletter to customers who bought last month will behave differently from an invitation to prospects who signed up a year ago. The reliable benchmark is your own history: how did the last five campaigns to this group perform, and is this one above or below that line?

A practical habit is to record the four figures and the ratios in a simple table after every send, with the date, subject line, day and time, the group, and what was different about this campaign. After ten campaigns you will see patterns that no general article can tell you.

Where the open number can mislead

Opens are usually measured with a tiny invisible image in the message. That method has limits, and you should know them before you make decisions from it.

  • Images blocked. If a recipient’s mail program blocks images, an open may not be counted even though the message was read.
  • Privacy features. Some mail programs load images automatically in advance, which can count as an open that never happened.
  • Preview panes. A message shown in a preview pane may be counted as opened without the recipient reading it.

For these reasons treat the open rate as an indication, good for comparing subject lines against each other under similar conditions, but not as an exact count of readers. Clicks are firmer evidence because they require a deliberate action. When a decision matters, such as which offer to repeat, lean on the click number and on what happened after the click, such as orders or enquiries on your website.

What to change when a number is weak

The value of statistics is in the next action. Each weak number has a short list of likely causes and cheap experiments.

Weak opens

  • Make the subject line specific: a concrete benefit, product or date beats a vague teaser.
  • Use a sender name people recognise.
  • Try another day or time and compare results over several campaigns.
  • Check that the list is clean: addresses that never respond drag the average down. Our guide to email list hygiene shows how to deal with them.

Weak clicks with good opens

  • Check that there is one clear main button, placed where it is visible without scrolling.
  • Use product photos and clear prices in sales emails. We explain the anatomy of such emails in sales emails that sell.
  • Make sure the headline repeats the promise of the subject line.
  • Test on a phone: a button that is hard to tap loses clicks.

High unsubscribes

  • Check how often you send. Too many messages is the most common reason.
  • Send fewer, better targeted messages to groups that expect them. See the guide to segmenting your list.
  • Review who is on the list. Recipients who signed up for one topic should not receive another.

An unsubscribe is not a failure. It is the system working as it should, and a recipient who leaves in one click is better than one who marks the message as spam. In our service, unsubscribing is automatic: the recipient is removed from your mailings and no longer receives your emails. The technical standard behind one-click unsubscribing is described in RFC 8058, and consent rules for electronic communications in the EU are set by the ePrivacy Directive.

A simple routine after every campaign

The following routine takes about ten minutes and keeps improvement steady. It matches the last step in how we prepare every campaign, which is the results step: after sending, you see how many emails were sent, opened and clicked, and how many recipients unsubscribed, and those numbers help plan the next campaign.

  1. Wait long enough. Most opens and clicks arrive within the first days, so read the numbers after a few days, not after an hour.
  2. Write down the four figures and calculate the four ratios.
  3. Compare with your last campaigns to the same group.
  4. Find the weakest step in the order opens, clicks, unsubscribes.
  5. Pick one change for the next campaign, and only one, so you know what caused any difference.
  6. Check results beyond the email. Look at orders, enquiries or visits that followed, because that is the reason you sent the message at all.

The five-step process behind a whole campaign, from goal to results, is described in our article on the email marketing campaign in five steps.

Comparing campaigns fairly

A comparison is only useful when the conditions are similar. Several things change the numbers more than the email itself.

FactorHow it distorts resultsHow to compare fairly
Different groupCustomers respond differently from prospectsCompare campaigns sent to the same group
Different day or seasonHolidays and sales periods change attentionCompare with the same period of the previous year or note the context
Different type of messageA newsletter and a discount offer attract different clicksCompare the same type of message
List size changesNew subscribers behave differently from old onesUse ratios, not counts
Several changes at onceYou cannot tell which one matteredChange one element per campaign

Using statistics to manage the list

Statistics are also a list-maintenance tool. Recipients who have not opened any message for a long time cost you attention and can hurt the reputation of your sending. Our service includes list management: grouping, filtering and removing duplicates. Combined with the figures, this lets you act.

  • Group recipients by how they behave, for example active readers and those who never respond.
  • Send a final “do you still want to hear from us?” message to the inactive group, and remove those who do not answer.
  • Remove duplicates so that nobody receives the same message twice.
  • Send your best content to the group that engages, and test changes on a small group first.

Remember that our service is available only for your own legally collected, confirmed (opt-in) mailing lists. Statistics cannot rescue a purchased list: sending to people who never agreed to receive your emails is spam, and the numbers will show it.

Frequency and timing: what the numbers say over weeks

Single campaigns teach you about content, but trends across several campaigns teach you about rhythm. If you send every week, plot the four ratios for the last eight sends. A slowly falling open rate together with rising unsubscribes is a classic sign of fatigue: the list is receiving more than it wants. A stable open rate with falling clicks often means the content has become predictable, so it is time to change formats, for example a short tip instead of a long announcement.

Timing deserves a modest experiment, not a theory. Send similar messages to similar groups at two different times, and compare the ratios. Do not draw conclusions from one pair; repeat the test a few times. Business audiences often behave differently from consumers, and a list of private customers may respond best in the evening, while a list of office workers may respond during working hours. Your own statistics are the only reliable answer.

What to put in your own reporting sheet

A reporting sheet does not need special software. A table with one row per campaign is enough, and it makes the statistics from our service easy to keep and compare.

  • Date and day of the week of sending.
  • The group or sub-group of recipients.
  • The subject line and the main offer or topic.
  • Sent, opened, clicked and unsubscribed, plus the four ratios.
  • One sentence on what was different this time.
  • The result outside the email: orders, enquiries or visits.

After a quarter, review the sheet together with the people who write the messages. Which subject lines opened best? Which offers produced the most clicks? Which groups unsubscribed more often? These conversations improve the next quarter more than any single clever trick.

Frequently Asked Questions

Which statistics do you provide for each campaign?

Every campaign has its own statistics: how many emails were sent, opened and clicked, and how many recipients unsubscribed. These numbers help plan the next campaign.

What is a good open rate?

There is no universal figure, because lists, industries and measurement methods differ. Compare each campaign with your own earlier campaigns to the same group, and treat opens as an indication rather than an exact count of readers.

Why are clicks more reliable than opens?

A click requires a deliberate action, while an open is usually detected by an invisible image that mail programs may block or load automatically. Use clicks, and the results after the click, for important decisions.

What should I do when many people unsubscribe?

Review how often you send and whether the message suits the group. Send fewer, more targeted messages, and check that recipients receive only the topics they signed up for.

What happens when someone unsubscribes?

Unsubscribing is automatic: the recipient is removed from your mailings and no longer receives your emails.

How long should I wait before reading the results?

Most activity happens in the first days after sending, so wait at least a few days before you judge a campaign, and compare it with other campaigns after the same waiting time.

The Bottom Line

Four numbers, sent, opened, clicked and unsubscribed, are enough to learn from every campaign. Turn them into ratios, compare them with your own history, treat opens with caution, and let clicks and the results after the click guide your decisions. Change one element at a time, keep the list clean, and use unsubscribes as honest feedback about relevance and frequency. If you would like us to design, send and measure your campaigns to your own opt-in lists, see the email marketing page or write to us.